Coalescing filters for oil separators

Oil separator is a device designed for the separation of gasoline, oil, greases and hydrocarbons. These devices are usually employed as pretreatment in first flush water treatment plants, generally after sedimentation chamber for solid separation.  There are two types of oil separators, gravity separators and coalescing separators. Coalescing separators are equipped with a plastic lamella filter which promotes the aggregation of lighter oil particles accelerating the natural process of separation by gravity. In this way, the separation efficiency is highly increased and it is possible to reduce the tank size.

The coalescing filters TFM produced by Refill-Tech have the following characteristics:

• CPI filters (Corrugated Plate Interceptor) with crossed-type design and 60° flutes inclination, as advised by API 421 regulation
• High corrugtation to promote oil particles aggregation
• High modularity and customization
• Suitability for horizontal and vertical layout

Discover more about our models TFM09, TFM 12, TMF 19, TFM 27 by checking their datasheets.

We are available to support you in the design of these systems and to provide any further information. 

Components for Scrubbers

Scrubber or absorption columns is a device for removing pollutants from a gaseous stream, usually dust and acid gases.Refill-Tech Solutions provides components for scrubbers, both vertical and horizontal ones. 

• BLADE TYPE DROPLETS ELIMINATORS - HORIZONTAL FLUX
  • DEP 001/002/003/004 

• PANEL TYPE DROPLETS ELIMINATORS - VERTICAL FLUX 
  • DEC 130/140/200, DES 130/260 

• RANDOM FILL MEDIA
  
  • PALL RINGS 25/38/50/90
    • Materials: PP, antistatic PP, reinforced fiberglass PP, SS 304/316/430
  • HOLLOW BALLS 25/38/45

• STRUCTURED FILL MEDIA
  
  • FMC09, FMC12, FMC19, FMC27, NMV30

We are at your disposal to find the best solutions for cost and perfomance optimization. Contact us for any further information.

Components for cooling towers

Refill-Tech Solutions provides components for any model of evaporative cooling towers (cross-flow, counter flow, with axial or centrifugal fans):

• FILM AND SPLASH STRUCTURED FILL MEDIA:
  • FMC12, FMC19, FMC27, FMC50, FMV21, NMV30

• PANEL TYPE DROPLETS ELIMINATORS:
  • DEC 130/140/200, DES 130/260, BLADE, CELLULAR MAX

• AIR INLET LOUVERS: 
  • IL 65, IL 80

We are at your disposal to find the best solutions for cost and perfomance optimization. Contact us for any further information.

Components for water and wastewater treatment

Water is a primary asset for life of our planet, and for this reason it is essential to improve the treatment systems for contaminants removal from water and wastewater. Refill-Tech Solutions' products, thanks to patented design, allow to optimize and improve water and wastewater treatment in any stage of a municipal or industrial treatment plants. As shown in the next image, our products can be applied in the following fields:

• PRETREATMENTS: lamellas for flotators (ex. DAF)
• PRIMARY SETTLING: lamella settlers for circular and rectangular tanks
• BIOLOGICAL TREATMENT: MBBR carriers, media for trickling filters and biofilters 
• SECONDARY TREATMENT: lamella settlers for circular and rectangular tanks
• CHEMICAL-PHYSICAL TREATMENT AND CLARIFLOCCULATION: lamella settlers

Click on the next image to discover all our products or contact us for any further information.