PopUp Aholic

pacchi drenanti

Drainage Fill Media

The usage of this technology provides a voidage ratio greater than 95%, requiring excavation volumes three times smaller than those of traditional gravel systems. The low density of the modules and the reduction in excavation volumes moreover assure a particularly simple and rapid installation: all advantages which when summed with those of its complete modularity and the possibility of cutting-to-size, do make Refill-Tech Solutions' products adaptable to a great diversity of morphological requirements as well as to the most particular and demanding project requirements, by no means least of which the ability to guarantee the carriageability of the areas above the drainage plant.

ADVANTAGES
• Logistical: it requires an excavation volume three times smaller than that required by traditional gravel drainage systems

• Operative: the lightweight modules can be installed without the assistance of mechanical handlingequipment
• Time-saving: the lightness of the modules means that they can be moved and installed very rapidly

• Technical-Hydraulic: this fill assures a regular and even distribution of the water, allowing the tank to be able to face the peak rainfall events

• Mechanical: the high mechanical strength permits the carriageability/load-bearing of the drainage system and the recovery and usage of the areas above it
• Environmental Sustainability: Use of regenerated PVC and reduction in transport volume correspond to a reduced CO2 footprintan

  • SWM

    SWM is a structured fill obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.

    Technical Characteristics
    Material of constructionPVC
    Length 1200/1800/2400 mm
    Width 600 mm
    Height 600 mm
    Voidage > 95% (950 litri/m3)
    Density from 20 to 45 Kg/m3
    Sheet Thickness from 300 to 1000 μm
    Compressive Strength sizing made job-to-job

    DOWNLOAD DATASHEET

  • GRM

    GRM is a structured fill obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.

    Technical Characteristics
    Material of constructionPVC
    Length 600/1200/1800 mm
    Width 300/600 mm
    Height 75 mm
    Voidage > 95% (950 litri/m3)
    Density from 20 to 45 Kg/m3
    Sheet Thickness from 250 to 500 μm
    Compressive Strength sizing made job-to-job

    DOWNLOAD DATASHEET

  • PPD

    PPD is a structured fill obtained from the assembly of PVC sheets which have been suitably corrugated by means of thermoforming.

    Technical Characteristics
    Material of constructionPVC
    Length 600/1200/1800 mm
    Width 300/600 mm
    Height 75/100/150 mm
    Voidage > 95% (950 litri/m3)
    Density from 20 to45 Kg/m3
    Sheet Thickness from 300 to 1000 μm
    Compressive Strength sizing made job-to-job

    DOWNLOAD DATASHEET

! Informativa! Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella Cookie policy.

  Proseguendo la navigazione, dichiaro di accettare i cookies di questo sito.